No ongoing chemical treatment or registration with local authorities required
Extremely Energy Efficient
Variable speed EC and AC fan technology – typically only 25% of traditional fan energy usage
Minimal Water Consumption
Less than 2% of Hybrid Cooling Tower and less than 0.5% of traditional Cooling Tower water usage
Fully built and pre-commissioned
Minimal Installation, Commissioning and Maintenance requirement
IoT (Internet of Things)
Compatible for communication around the world with standard WiFi or optional 3G controls
2 Year Warranty
Including parts and labour in UK mainland, parts only elsewhere – Extendable to 5 years
Details about Transtherm's Adiabatic Cooler | Adiabatic Cooling
Very effective management of Legionella risk
Thanks to a host of safety features, developed in conjunction with advice from The British Health & Safety Executive’s leading Legionella Risk Assessors, Transtherm’s Adiabatic Coolers are considered to be of a low Legionella risk. Since Transtherm Adiabatic Coolers do not collect or re-cycle the evaporative water they are confirmed under the very latest legislation as not requiring costly ongoing chemical treatment or registration with local authorities.
Low Legionella Risk
Minimal Maintenance Requirements
Transtherm’s adiabatic system only operates in the peak of summer (for approximately 3% of the year) and cooling requirements are handles in dry cooling only mode for the rest of the time. The system operates automatically when required including spraying, purging and auto drain down. Other than the direct drive fans with sealed for life motors and adiabatic spray pump there are no moving parts. As Transtherm’s adiabatic system does not re-cycle water using a collection basin and does not use cellulose wetted pads there are no complicated maintenance issues.
Minimal water use
IoT Ready Control Panels
All Transtherm Adiabatic Coolers include complete PLC based control panels that can communicate with a local BMS with Modbus or BACnet protocols. For worldwide communication availability every control panel includes a standard WiFi system or, alternatively, an optional 3G system can be specified. Transtherm’s Internet of Things ready controls offer a host of read only and read / write parameters including health status, dry or adiabatic mode, error messages, temperature set point adjustment and, using an optional power meter, instantaneous power consumption etc.
WiFi and 3G
Transtherm use the most advanced equipment selection and 2D/3D modeling software. This ensures our dedicated team provides an unmatched combination of capability and flexibility in the design of your cooling system. Bespoke footprint, acoustic and construction material requirements are all catered for.
Fit your business needs
Who are Using Transtherm's Adiabatic Cooler | Adiabatic Cooling?
Chelsea and Westminster Hospital
Transtherm were approached to provide 3 x large Adiabatic Coolers (1 x 768kW, 1 x 960kW, 1 x 1,152kW) to dissipate the heat from an absorption chiller circuit that is fired from the waste heat of a CHP (Combined Heat and Power) system.
Oxford Brookes University
470kW and 359kW Transtherm Adiabatic Coolers were supplied to dissipate condenser water heat from Absorption Chillers. Due to the hardness of the local water supply, the coolers were all supplied with Transtherm’s air inlet filters.
Toyota - North Wales Plant
2 x 2MW Transtherm Adiabatic Coolers were used to replace a large cooling tower. By using Transtherm adiabatic Coolers, the end user was able to eliminate ongoing chemical treatment and save huge amounts of water and energy.